Process Pump

Features
  1. LHP process pumps are designed to handling liquids in light chemical, petrochemical, pharmaceutical industries.
  2. These oumps are having low NPSH and high efficiencies.
  3. Optimum compact design due to Monoblock construction free from misalignment. Hence longer life.
  4. Pumps are suitable for horizontal mounting with top central discharge.
  5. The rotar with shaft and impeller are dynamically balanced to give low noise level and longer bearing life.
  6. Low initial and maintenance cost due to Monoblock construction.
  7. Loger rated life of gland packin / mechanical seals.
  8. Low operating cost.
  9. Double shielded bearings with high temprature grease are used. No greasing is required as bearings are pregreased for life.
  10. Base frame and couplings not required.

Process Pump

Type

Head Range

Discharge

Monoblock Process Pumps 0.5 HP to 40 HP Monoblock Process

78 m (7.8 Bar)

135 m3/h (2300 lpm)

Two Stage

78 m (7.8 Bar)

105 m3/h (1750 lpm)